CE Mark - Self Certified And Through Notified Body
The CE marking is a key indicator (but not proof) of a product’s compliance through European Union (EU) health, safety and environmental protection directives and regulations.If your product comes under the scope of a directive requiring CE marking you must ensure the product complies with the applicable requirements or fulfill the requirement of harmonized standard and affix the CE mark(Standard logo) before placing it in the market in the European Economic Area (EEA). Often the CE marking is described as a trade passport because it enables the free movement of products within the European market.
KBS has collaboration with Applus+ Laboratory, Spain (Notify Body No. 0370) to provide CE marking and training services in India/Abroad. Applus+ is one of the world's leading testing, inspection and certification companies which have more than 20,000 employeesaround the world. Applus+operates a network of more than 350 offices and laboratories in more than 70 countries across the globe.
KBS can assist you togain easier access into the European market by ensuring your product meets all the CE mark requirements. If you manufacture or import products which fallsunder the scope of one or more of the New Approach Directives then you will need professional guidance on how to meet all the essential requirements of these directives. KBS has the capabilities and technical expertise for professional guidance -
- Review of product specification(s)
- Identification of Directive(s)&applicable Harmonized standard(s)
- Testing of products by NABL/Notified body lab etc.
- Review of Technical File
- GAP analysis and pre certification audit
- Performing Audit
- Affix CE marking
Products and Directives in which KBS Certifies
Machinery Directive (2006/42/EC)
Machinery is regulated by the machinery directive, often referred to as MD, which defines the basic safety requirements for machinery to be placed on the European market. When machinery manufacturers place CE marking on their product, they are stating that the product complies with all applicable directives. To affix CE marking to a product, manufacturers must issue a Declaration of Conformity (DOC). This is a formal signed statement indicating conformity of the referenced product to the listed provisions of the applicable directive(s) and standards
Low Voltage Directives –2006/95/EC”
The purpose of the Low Voltage Directive is to ensure the safety of people, domestic animals, and property by protecting them against hazards caused by electrical equipment. Manufacturers must ensure protection against hazards stemming from the electrical equipment by addressing factors such as temperature, arcs and radiation. Insulation must be suitable for the conditions of use. The manufacturer must also offer protection from hazards arising from external influences on the electrical equipment such as mechanical, chemical, fire, electromagnetic frequency (EMF) or thermal risks.
All electrical equipment designed for use with a voltage rating between 50 and 1000 volts for alternating current (AC) or between 75 and 1500 volts for direct current (DC) are covered by the Low Voltage Directive. Voltage ratings refer to the voltage of the electrical input or output, not to voltages which may appear inside the equipment.
EMC Directive – 2004/108/EC”
The purpose of the EMC Directive is to have electronic or electrical products function properly when they are in proximity to other electronic and electrical products by a) ensuring that electrical and electronic products do not emit electromagnetic disturbances that will adversely affect other products; b) making the apparatus immune from incoming electromagnetic disturbances. The EMC Directive covers “apparatus,” “components and sub-assemblies,” and “mobile installations.” Apparatus means any finished appliance or combination of appliances made commercially available as a single functional unit which can generate electromagnetic disturbance or whose performance is affected by such disturbance. Components or sub-assemblies are intended for incorporation into an apparatus by the end user. They cannot generate emissions and must be immune from incoming emissions to ensure their intended performance. Mobile installations are defined as a combination of apparatus and where applicable, other devices, intended to be moved and operated in a range of locations.
Construction Products Regulation – Regulation (EU) No 305/2011
The Construction Products Regulation (CPR) has a very broad scope and applies to all types of products from welding consumables to building materials to road construction products. All products covered by the regulation must meet the relevant essential performance
characteristics which are related to the ‘Basic requirements for construction works’ as defined within Annex I of the CPR. These requirements fall into the following categories viz mechanical resistance and stability, safety in the case of fire, hygiene, health and the environment, safety and accessibility in use, protection against noise, energy economy and heat retention, sustainable use of natural resources.
Personal Protective Equipment Directive (89/686/EEC)
The Personal Protective Equipment Directive (89/686/EEC) sets out requirements relating to the design, manufacture and supply of PPE. The PPE Regulations 2002 provide manufacturers of PPE, or those importing PPE into Europe with the option of complying directly with its basic health and safety requirements, or with harmonised European Standards which have been developed specifically to allow a presumption of conformity with those requirements.
Pressure Equipments Directive(PED) -97/23/EC
The PED has a wide scope, covering the design, manufacture and conformity assessment of pressure equipment and assemblies with a maximum allowable pressure PS greater than 0.5 bargauge). Pressure equipment exceeding a certain risk threshold must meet the essential safety requirements set out in Annex I of the PED. Depending upon the type of equipment - its pressure rating, volume or nominal size and fluid content, manufacturers may select from a range of conformity assessment modules, which include manufacturers self-certification, third-party type examination or design examination, third-party inspection, quality management system certification. The risk category for pressure equipment is set out in Annex II of the PED. Only lower-risk equipment may be subject to manufacturers self-certification and most pressure equipment must be certified by a notified body.
Medical Devices Directives -93/42/EEC
The Medical Device Directive is intended to harmonize the laws related to medical devices within the European Union. In order to legally place medical device(s) on the European market, manufacturer(s) should comply with the requirements of the MD Directive. Product(s) and quality system of an applicant must be assessed and the manufacturer must affix the CE marking before placing the product(s) on the market.
GOST- R certificate and declaration services–
GOST-R certification is mandatory for a wide range of products in the Russian market.Without Gost-R certificate customs does not give the clearance for sale and/or marketing in the country. The GOST-R certificate of conformity signifies that imported products comply with Russian standards, quality and safety requirements.
The Gost-R Russian certification programme covers a wide range of products including cosmetics, food products, toys, textiles, household electrical products and industrial equipment.
Types of certification schemes:
- Customs Union Certificate TRCU
- Certification GOST
- Technical Regalement Conformity Certificate
- Declaration of conformity TRCU
- State Registration
- Single shipment certificates
- Pattern approval certificate
- Exemption Letter
KBS help you to ensure that your products comply with Russian safety regulations and achiveing the GOST-R certification.
The American Petroleum Institute (API) is the only national trade association that represents all aspects of America’s oil and natural gas industry. The members of API are dedicated to continuous efforts to improve the compatibility of their operations with the environment while economically developing energy resources and supplying high quality products and services to consumers. The US Youth Committee (USYC) to the World Petroleum Council (WPC) was formed to strengthen the impact both young professionals and university students can have in developing solutions to global energy issues. The USYC hosts events to enable conversations among youth with a passion for the industry.
KBSprovides consultancy for companies internationally to achieve license to API product specifications and certify to quality specifications (e.g., API Q1, ISO TS 29001, ISO 9001). KBS can assist you whether it’s your first certification audit or if your quality management system needs minor changes or a complete revision. KBS consultants are competent with proven oil and gas industry track records.
Throughout your company’s API certification process, KBScan:
- Review and comment on your quality manual and/or your procedures to the requirements of API Spec. Q1 and/or API Spec. Q2
- Periodically meet with your staff to offer guidance on the development, deployment, and implementation of your QMS to the requirements of API Spec. Q1 and/or API Spec. Q2
- Perform and document a pre-assessment to the requirements of API Spec. Q1 and/or API Spec. Q2 prior to the API audit
- Be present during the API Q1 and/or Q2 licensing audit
- Assist in the response to any audit nonconformities that may arise during your API Q1 and/or Q2 licensing audit
- Assist in implementation of the remedies result from the response to your audit nonconformities
RoHS, also known as Lead-Free, stands for Restriction of Hazardous Substances. RoHS, also known as Directive 2002/95/EC, originated in the European Union and restricts the use of six hazardous materials found in electrical and electronic products. All applicable products in the EU market after July 1, 2006 must pass RoHS compliance. RoHS impacts the entire electronics industry and many electrical products as well.
The substances banned under RoHS are lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (CrVI), polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), and four different phthalates (DEHP, BBP, BBP, DIBP).
KBS helps and support companies regarding the RoHS Compliance .
CCC (China Compulsory Certificate mark),
The China Compulsory Certificate mark, commonly known as a CCC Mark, is a compulsory safety mark for many products imported, sold or used in the Chinese market. It was implemented on May 1, 2002 and became fully effective on August 1, 2003.
It is the result of the integration of China's two previous compulsory inspection systems, namely "CCIB" (Safety Mark, introduced in 1989 and required for products in 47 product categories) and "CCEE" (also known as "Great Wall" Mark, for electrical commodities in 7 product categories), into a single procedure.
KBS will help and assist you get CCC certificate.
The FCC Declaration of Conformity or the FCC label or the FCC mark is a certification mark employed on electronic products manufactured or sold in the United States which certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications Commission. The FCC label is found even on products sold outside the US territory, because they are either products manufactured in the US and had been exported, or they were manufactured in other nations which have US as a prime market (e.g.: Japan, China). This makes the FCC label recognizable worldwide even to people to whom the name of the agency Federal Communications Commission is not familiar.
Starting in October 2002, in accordance with EU Directive 72/245/EEC, and amendments to the requirements of Directive 95/54/EC, all access to the EU market to sell the vehicle electrical and electronic products, it is necessary to e-Mark certification testing, stickers e signs EU customs clearance would be to allow access to local markets, so auto electronic products on the e-Mark certification, it is imperative.
E mark from the Economic Commission for Europe (Economic Commisssion of Europe, referred to as ECE) regulations promulgated by (Regulation). ECE, including the current 28 countries of Europe, with the exception of EU member countries, also including Eastern Europe, Southern Europe, Africa and Europe and other countries. ECE regulations apply to all members is recommended, not mandatory standards. Member States can be applied to ECE regulations, can also be extended using its own laws and regulations. At present, the demand from the market point of view, usually willing to accept members of ECE regulations in line with the ECE test reports and certificates. E signs the certificate of product components and system components is not the appropriate vehicle certification regulations. Access to E logo certified products, is accepted by the market. E common signs of domestic products are certified automotive light bulbs, glass, tires, triangular warning signs, automotive electronic products. E logo certification testing of the implementation of ECE member countries are generally technical services. E signs the certificate issuing bodies are members of ECE government departments. Countries the corresponding number of certificates:
E1-Germany; E2-France; E3-Italy; E4-Netherlands; E5-Sweden; E6-Belgium; E7-Hungary; E8-Czech Republic; E9 - Spain; E10-Yugoslavia; E11-British; E12-Austria; E13-Luxembourg; E14-Switzerland; E16-Norway; E17-Finland; E18-Denmark; E19-Romania; E20-Poland; E21-Portugal; E22-Russian; E23-Greece; E25-Croatia; E26-Slovenia; E27-Slovakia; E28-Belarus; E29-Estonia; E31-Bosnia-Herzegovina; E37-Turkey;
e marked by the European Commission in accordance with the mandatory members of the EU Directive motor vehicle use, security components and systems of certification mark. Testing agencies must be members of the European Union's technical service agencies, certification bodies are members of the Government of the EU transport sector. Access to e logo certified products of the EU member states will be recognized. Certification with the E mark, as members of a corresponding number of certificates:
e1-Germany; e2-France; e3-Italy; e4-Netherlands; e5-Sweden; e6-Belgium; e9-Spain;
e11-British; e12-Austria; e13-Luxembourg; e17-Finland; e18-Denmark; e21-Portugal;